Red sculpture clay with 40% fine grog 0-0.5 mm (up to 35 Mesh). Designed for artistic ceramics, it is ideal for sculpture and decorative murals. The high content of grog confers a beautiful textured surface and an excellent behavior during drying and firing. Depending on the firing temperature, it develops a beautiful range of red tones that intensify with temperature and provide an ideal means of artistic expression. Available in extruded body (moist form).
Firing range*: 1100-1260ºC / Cone 03-7
Biscuit temperature: 1000ºC / Cone 06
Water content: 19%
Plasticity (IP Atterberg): 18
Carbonate content (CaCO3): 0%
Drying shrinkage: 6.6%
Firing shrinkage 1260ºC: 3.8%
Porosity (water absorption) at 1260ºC: 8.6%
Dry bending strength: 2.1 N/mm2
Fired bending strength (1260ºC): 31.0 N/mm2
Thermal coefficient 1240ºC (25-500ºC): 60.8x10^-7ºC^-1
Available in the United States and Canada. ACMI AP Seal. Conforms to ASTM D-4236
(*) Firing range recommended for the clay to develop its best performance, both in terms of technical and safety characteristics, under conventional firing conditions. The color samples may show temperatures outside the recommended range to provide a broader view, but these are pieces fired under controlled conditions. Cone equivalence according to Orton table for self-supporting cones, regular-SSB and 150ºC/hr heating rate.
