This listing is for one approximately 5.25 inch x 4 inch (13.3 x 10 cm) sheet containing 6 leaf skeleton decals. The decals are on average 2 inch (5 cm). They are real 23 karat gold**
These decals can be used with ceramic, porcelain, glass fusing and enamel firing. Once applied these decals need to be fired in a kiln. They cannot be fired in a home oven.
Ceramic artists: These low temperature decals are generally applied as a third firing on top of an already fired glaze. Once applied, these decals need to be fired in a kiln to CONE 018 to CONE 016 (1450°F / 800°C). Once fired, the decals become permanently fused with the glaze, similar to decorative dinnerware. Decal application and firing instructions can be found at this link.
Decals are printed images made from mineral toners. The toners are either silkscreen or digitally printed on special paper coated in a water soluble glue. The colored images are then covered with a coating. When the decal is wet, the image is released from the paper, applied and fired in a kiln. Once fired these colors will become permanently embedded on top of the glaze.
Sheet Size: 4" x 5.25"
Also available in High-Fire Decal Large Leaves Black High Temp
**All Milestone decals are printed in the USA using certified conflict-free precious metals.**